[A paste let you know 12 categories of storage shelves and their functions]

      Storage Shelf is a storage device, is based on packaging, transportation, handling, sorting, information management is the logistics of the six basic functions. With the continuous development of the storage shelves industry, more and more industries and enterprises to the use of storage shelves, more and more enterprises to enter the warehousing industry. Services in the community friends. The shelf is one of the main storage facilities, it can be said that the shelf is a modern industrial warehouse, logistics center, an integral part of the distribution center.

Storage shelves function

1, three-dimensional structure, can make full use of warehouse space, improve the capacity utilization of the warehouse to expand the storage capacity;

2, easy access to goods, FIFO can be done, one hundred percent of the selecion capacity, smooth inventory turnover;

3, the warehouse shelves of goods, at a glance, easy to inventory, division, measurement and other very important management work;

4, to meet the large quantities of goods, a wide variety of storage and centralized management needs, with mechanical handling tools, the same can do storage and handling work orderly;

5, the goods stored in the shelf, do not squeeze each other, material loss is small, can fully guarantee the function of the material itself, relief of goods in the storage part of the loss;

6, to ensure the quality of stored goods, you can take moisture, dust, theft, anti-sabotage and other measures to improve the quality of storage materials;

7, to meet the modern enterprise low-cost, low loss, high efficiency of the logistics supply chain management needs.

8, load-bearing capacity, not easy to deformation, reliable connection, easy disassembly, diversification.

Therefore, the storage shelves play a huge role in the development of modern industry, with the development of modern industrial civilization, the structure and function of storage shelves are also constantly improving.

Classification of storage shelves

     Heavy-duty pallet racks are made of high-quality cold-rolled steel sheet, which can be up to 10 meters in height without any seams. The beams are made of high-quality square steel with large load-bearing capacity and are not easily deformed. The pendulum is inserted and connected between columns and columns. Reliable, easy disassembly, and the use of nails to prevent forklift work to stir up the beams; all the surface of the shelves are pickling, phosphate electrostatic spraying process, corrosion rust, beautiful appearance. For large warehouses.
      Medium-sized shelf unique shape, reasonable structure, easy assembly and disassembly, without screws, and strong and strong, carrying capacity, widely used in shopping malls, supermarkets, warehouses and public institutions.

     Light punching rack is a versatile structural system, can be widely used in the assembly of light rack, table, tool car, suspension system, safety nets and support skeleton. The length of the punching angle can be quickly cut in accordance with the scale, with any assembly screw, modify and re-install, so that it can meet the well-planned use, but also to meet the needs of emergency use.

      Mold shelf is also called the drawer type shelf, also known as the mold shelf, mainly store all kinds of mold items, according to the layer load capacity requirements are divided into light mold and heavy mold shelves. The top of the shelf can be configured mobile hoist car to facilitate the lifting of the mold.

       Beam shelves safe and convenient for a variety of warehouses, direct access to goods. Is the simplest and most widely used shelf, can make full use of space. Convenient pallet access, effectively with forklift loading and unloading, greatly improve operating efficiency.

        Mechanical equipment requirements: counterbalanced forklift or forklift. Stacker can increase the utilization rate of 30% of the ground space, the operation height of 16 meters.

        The characteristics of the beam shelf: smooth inventory turnover; can provide 100 per cent of the selecion capacity; improve the average picking rate; to provide quality product protection; because the beam type shelf for variety, bulk cargo storage, in order to facilitate access , The design of the roadway will be more, so the ground utilization is relatively low.

      Corridor-style shelves have also become through-shelf, into the shelves. Designed to store a large number of similar pallet cargoes. The trays are stored one after the other in the depth direction on the support rails, increasing the storage density and improving the space utilization. This shelf is usually used in storage space expensive occasions, such as cold storage.

        Corridor-style shelves have four basic components: frame, rail support, tray rails and inclined rods and so on. This kind of shelf warehouse utilization rate is high, can realize first-in-first-out, or advanced out; suitable for storage of large quantities, fewer varieties of goods, batch operation; available minimum space to provide maximum storage capacity; applicable to large quantities, few varieties of goods Stores the job. Forklift truck can be directly into the goods within the cargo, the operation is extremely convenient.

        Mechanical equipment requirements: anti-balanced forklift or stacker shelf characteristics. For low inventory storage; can provide 20% -30% of the optional; for the low pick-up rate of the warehouse. Ground use rate: 60%, higher (according to the above design calculation).

       The pallet operation follows the FIFO principle; the automatic storage rotation; the storage and picking of the two actions separate greatly improve the output, due to the fact that the operation of the tray is not the same as that of the conventional pallet rack, Is self-gravity sliding the cargo, and there is no operating channel, so reducing the number of transport routes and forklifts. In the shelves of each channel, are installed with a certain slope, with rails, storage unit of goods under the action of gravity, from the storage side to the library side.

        Such a warehouse, there is no operating channel between the row and row, greatly improving the storage area utilization. But the use of the best in the same row, the same layer of goods, should be the same goods or a storage and storage of goods at the same time. Height adjustable, with various models of forklifts or stacking machine, to achieve rapid access to a variety of trays, unit capacity of the largest cargo bearing up to 5000kg, is the most commonly used methods of storage businesses.

     Cantilever shelves are suitable for storing long and irregular cargoes, and the cantilever arms have a light weight and good load capacity, and can greatly improve the utilization and work of the warehouse when they are stored with irregular or lengthy materials. effectiveness. After the increase of the shelf, especially for small space, low warehouse, management convenience, wide field of vision, compared with ordinary shelf shelf, the utilization rate higher.
     Loft-style shelf-wide modular structure, can be wood, tread plate, steel, and other materials to do the floor, can be flexibly designed into two and multi-layer, for hardware tools. Electronic equipment, machinery spare parts and other items of small packages of spare parts storage, storage of more varieties, less use of space full of small quantities of goods. Applicable to a limited variety of venues, a small number of cases, it can increase in the existing site several times the utilization rate can be used in conjunction with the lift operation. Full combination of structure, dedicated light steel floor, low cost, fast construction. According to the actual site and needs, flexible design into a two-story, multi-layer, make full use of space.

       Use of fluency, the goods into the plastic box or turnover box, the use of cargo weight, to achieve the first-in, first-out for the production line or assembly line material storage, the material can rely on gravity along the roller slide.

      Forklift without the need to enter the roadway, saving time and improve the safety of personnel and goods, the Treasury greatly improve the efficiency of access to goods, make full use of the Treasury space, the Treasury can use about 80% to 85 of space for different types of products can be divided into Layer flexible access; compared to driving into the frame, through the frame, the structure of solid roots, high safety factor, can be achieved FIFO and advanced out.
                                                                                                                 
 
       The scale of the development of enterprises to expand the scale of the logistics of a substantial increase in the shelf, land resources in the increasingly tense, rising warehouse rents the pressure of rising labor costs, more and more enterprises to improve the function of the Treasury shelf system to improve the Treasury shelves Space utilization, is the modern enterprise warehouse shelves and logistics center of an indispensable part of the shelf, speed up the logistics speed, highlighting the higher requirements, the rapid increase in the use of. In the demand-driven, the shelf industry has been rapid development, but because of the lack of storage industry norms shelf, warehouse-type shelf industry is facing increasingly fierce market competition, in order to better development, storage shelves industry must continue in the shelf product development, Shelf innovation and other aspects of efforts.