To prevent damage to the shelves of effective measures

     Warehouses and distribution centers are very busy, so effective preventive measures are essential to prevent injuries to employees and minimize losses. However, in a limited space such as warehouses, workers manipulate heavy equipment, heavy loads, and are prone to accidents. Even the most experienced drivers occasionally crash when a five-ton forklift crashes into a pallet rack that is damaged. The collapse of the shelf is rare, but the structural integrity of the shelf will be reduced, for the future risk of planting the seeds. So we can take early measures to prevent these accidents and minimize losses.

01 training

Drivers' training should be a primary consideration. The driver's license is a requirement of all forklift drivers. Drivers should also be trained on shelf systems and maintenance, features, and operation of the truck.

02 Visibility

A wider line of sight drivers make it easier to operate the forklift safely. Adequate lighting can help the driver safely judge the aisle, and clearly see the location of the shelves. Similarly, the wide-angle lens is mounted on a forklift, giving the forklift driver the ability to observe the surrounding environment. At the end of the channel, the chances of an accident are greatly reduced.

Shelf overhaul

The pallet rack is subject to a lot of wear. Collisions with forklifts, improper loading, climbing workers, and stress caused by improper use of the shelves. Employees should periodically check the integrity of the shelf structure, damaged columns, corrosion, overload, and ground conditions.

04 Replacement / Repair

Damaged shelf parts should be replaced or repaired immediately. Continued use of a structural damage to the shelves can lead to danger, which will generate more than solve the problem of cost. In many cases, repairs are cheaper and more time-saving than rack replacement.

05 aisle clearance

The channel should be free of debris, and the driver using the forklift has sufficient width. The stack of pallets in the aisle increases the likelihood of an accident.

06 Shelf load

Shelves should be properly labeled with well-defined load tolerances. The driver should be properly trained to keep the load on the shelf in balance, keeping the weight centered. A heavier load should be placed at the lower shelf level, and the shelf column should be designed with reference to the heaviest pallet that can be stored as a reference. This may require a reinforced post.

07 shelves

When deciding on a new shelf system, even the replacement of damaged components, the type of shelf column is essential. Closed tube, high-strength structure of the shelf column in the forklift collision than the open-shelf shelf more resistant to damage. While it may cost a little more, it will significantly reduce the risk of collapsing the shelves. Shelves in seismic hazard zones must be constructed in accordance with seismic specifications.

08 Speed ​​limit

The eye-catching speed limit signs, and general warehouse security measures, are a good way to keep employees aware of security issues.

Shelf protection

Eventually, a forklift will hit a shelf. There are a number of optional safety guards to prevent or limit the damage caused by these effects.

Warehouse is a busy and dangerous activity center, at any time accidents. However, proper planning, staff training, and proper maintenance of equipment, many accidents can be avoided. As the old saying goes, "One point of prevention is better than very good."